Contact Us   
Search   
Your Position: Home > Product > FRP products

FRP Angle

Update: 2017/3/1      View:
  • Brand:    CYS
  • Type:    
  • Price:     RMB
  • Promotion:     RMB ( 0 Customers Bought)
  • Order Online   Add to favorites
Introduction

Structural Fiberglass FRP Angle


Fiberglass Reinforced Angle is a high-performance fiberglass beam manufactured through pultrusion process.

Unidirectional roving provides FRP Angle longitudinal tensile strength, and continuous filament mat, woven roving, or stitched fabric provide the profile with its transverse properties.

Then, fiberglass reinforcement and resin impart FRP profiles excellent mechanical strength, electrical insulation, anti-corrosion etc.


Characteristics of Fiberglass Reinforced I-Beam:

Non-corrosive , Lower life cycle cost

Easy to fabricate and install, Lightweight

High strength, High impact strength

Greater flexural strength than timber, Dimensional stablity

Electrically non-conductive and thermally non-conductive

Resists insect damage, Fire retardant

Wide working temperature, Low water absorption, Non-magnetic


Where to use Fiberglass Reinforced Angle?

1.    Petroleum and Chemical Industry

The FRP Angle characters good corrosion resistance property. It can be widely used in Petroleum and Chemical Industry as structural support of electricity and pneumatic transmission line, generator radiator, stairway and handrail, operating platform, walk way, fuel tank, switch panel, switch board room, drainage pipe and drainage system, berth recognition marks and underwater recognition marks, padding support in tower and filter board, drilling platforms etc.

2.    Electrical & Electronics Industry:

As its excellent electric insulation property, FRP Angle is widely used as insulation support profiles, insulation ladder, high voltage power supply operating board, etc. 

3.    Building Construction Industry:

Oversize bridge protection closed system, movable house structure, working platform, window frame, window sash and its components, etc.

4.    Foundation Engineering Industry:

 Freeway antiglare shield and its handrail, lamp post, water treatment, bracket foe huge industry cooling tower, etc.  

5.    Transportaion system:

Used as compression bar, corner board, acoustic absorption board and anti-glare panel, ect.

6.  Cold storage: As it is non-conductive thermal insulation material, it can be used as framework material of freezer and cold storage.


Which specifications are available

Fiberglass Reinforced Angle Pultrusions are available in three series for different applications and environments.

Standard Grade 

 

General purpose structural grade. Isophthalic polyester resin system with good corrosion resistance.

Color: olive green.

Fire Retardant

(FR)/UV Grade 

 

General-purpose series utilizing fire-retardant isophthalic polyester resin system with a UV inhibitor. Color:

Gray or yellow

Fire Retardant Vinylester

(VE Grade)

 

 Fire retardant vinylester resin with fire retardance, low smoke generation and highly corrosion resistant.

Color: Sand Beige

Note: Customer size, color and length are available. 


How is fiberglass reinforced Angle made?

Pultrusion is a manufacturing process for producing continuous lengths of fiberglass reinforced plastics shapes with a constant cross section. All fiberglass reinforcements are first fed through preforming guides, then pulled through a bath of resin and through a heated die into its final shapes. The resin bath contains a mixture of resin, most commonly polyester or vinylester, pigments to add color and filler to enhance properties. After composite (FRP profile) coming out from the die, it allows post-cure during Pulling system and then cut into stock lengths.


More Products